If you are installing a glass sink in your bathroom, you want to be sure that it will stand the test of time.

Many people may initially be disheartened at the prospect of a glass sink, but if you use the correct cleaning and care methods, it can be incredibly thoughtful and long-lasting, as well as giving your home a sleek, contemporary look.

In general, sinks, bathtubs and toilets are made to withstand high temperatures and impacts, even if they are made of glass. But it’s still important to care for them properly to make sure they continue to serve you well.

Sure, when you were deciding which sink to bring into your home, you took the durability of each material into consideration, but you’ll still want to do everything you can to avoid having to replace it in the future. Obviously, the cleaning and care method will be different than for stone or ceramic sinks.

In terms of durability, caring for your sink begins at installation. It is always recommended that a professional plumber install your sink, as the main cause of breakage tends to be a poor installation. The next thing to consider is how it will look after your new bathroom feature.

If your basin is made of glass, you will want to make sure you never pour flaked water into it. This is because a drastic and immediate change in temperature can cause it to shatter and shatter, although glass usually withstands temperatures of up to 21 degrees Celsius.

It is also important to make sure it is installed with a glass ring bracket underneath; This will ensure that it remains tight and leak-free. A ring holder can be particularly effective if the sink is mounted on a marble or granite work surface.

Another thing to keep in mind if you opt for a glass sink is that it will be transparent. This means that excessive sealant will be visible through the material, so be aware of how much silicone you use and where you apply it.

As you may already know, glass is also prone to breakage, even if it is high-quality, so make sure the plumber installing your new sink knows how to tighten debris by hand, rather than using a wrench or spanner.

For added safety, be sure to opt for a sink made of safety glass, which will be resistant to minor accidental breakage, such as dropping a brush or bottle into it. However, keep in mind that a heavy object will break a glass container, just as it would if it were made of porcelain.

Similarly, most glass sinks manufacturers recommend that they not be installed in areas where indoor temperatures are not regulated, as large variations in climate can cause thermal shock and ultimately break glass. .

Unfortunately, one of the dangers of glass is that thermal shock could also cause it to break. Due to the nature of the material, once a breakage has occurred, even a minor breakage, the entire sink will need to be replaced to remain safe for use.

When it comes to cleaning, glass sinks do not require any special methods, although it is best to avoid using abrasive bathroom cleaners as these will leave permanent marks on the glass. For similar reasons, do not use scourers or rough scouring pads.

The best way to clean a glass sink is with a soft cloth, vinegar, and water, just like you would clean a window. This will remove the water stain and keep it looking spotlessly clean.

Therefore, when properly treated, glass sinks can be incredibly resistant to wear and tear and will remain as beautiful as the day they were purchased.

Leave a comment

Your email address will not be published. Required fields are marked *